Differences

This shows you the differences between two versions of the page.

--- lilo [2024/05/22 22:15] – wigums
+++ lilo [2024/07/23 16:19] (current) – external edit 127.0.0.1
@@ Line 22: / Line 22: @@
 we will add stanzas for the kernels we've installed
+here is a default lilo.conf as generated by liloconfig
+<code># LILO configuration file
+# generated by 'liloconfig'
+#
+# Start LILO global section
+# Append any additional kernel parameters:
+append=" "
+boot = /dev/sda
+# This option loads the kernel and initrd much faster:
+compact
+# Boot BMP Image.
+# Bitmap in BMP format: 640x480x8
+  bitmap = /boot/slack.bmp
+# Menu colors (foreground, background, shadow, highlighted
+# foreground, highlighted background, highlighted shadow):
+  bmp-colors = 255,0,255,0,255,0
+# Location of the option table: location x, location y, number of
+# columns, lines per column (max 15), "spill" (this is how many
+# entries must be in the first column before the next begins to
+# be used. We don't specify it here, as there's just one column.
+  bmp-table = 60,6,1,16
+# Timer location x, timer location y, foreground color,
+# background color, shadow color.
+  bmp-timer = 65,27,0,255
+# Standard menu.
+# Or, you can comment out the bitmap menu above and
+# use a boot message with the standard menu:
+#message = /boot/boot_message.txt
+# Wait until the timeout to boot (if commented out, boot the
+# first entry immediately):
+prompt
+# Timeout before the first entry boots.
+# This is given in tenths of a second, so 600 for every minute:
+timeout = 1200
+# Override dangerous defaults that rewrite the partition table:
+change-rules
+  reset
+# Normal VGA console
+vga = normal
+# Ask for video mode at boot (time out to normal in 30s)
+#vga = ask
+# VESA framebuffer console @ 1024x768x64k
+#vga=791
+# VESA framebuffer console @ 1024x768x32k
+#vga=790
+# VESA framebuffer console @ 1024x768x256
+#vga=773
+# VESA framebuffer console @ 800x600x64k
+#vga=788
+# VESA framebuffer console @ 800x600x32k
+#vga=787
+# VESA framebuffer console @ 800x600x256
+#vga=771
+# VESA framebuffer console @ 640x480x64k
+#vga=785
+# VESA framebuffer console @ 640x480x32k
+#vga=784
+# VESA framebuffer console @ 640x480x256
+#vga=769
+# End LILO global section
+# Linux bootable partition config begins
+image = /boot/vmlinuz
+  root = /dev/sda2
+  label = Linux
+  read-only
+# Linux bootable partition config ends</code>
 <code>prompt
 timeout=50
-boot=ADD_YOUR_BOOT_DEVICE_HERE
+boot=/dev/sda
-root=ADD_YOUR_ROOT_DEVICE_HERE
+root=/dev/sda2
 lba32
 compact
-append="ADD_YOUR_KERNEL_APPEND_ENTRIES_HERE"
+bitmap = /boot/Slackware_Moonboot.bmp
+bmp-colors = 255,0,255,0,255,0
+bmp-table = 60,6,1,16
+bmp-timer = 65,27,0,255
+append="mitigations=off"
 vga=normal
 default=Gen6.9.1
@@ Line 42: / Line 117: @@
 image=/boot/vmlinuz-huge-6.6.30
   label=Hug6.6.30
-  initrd=/boot/initrd-6.6.30.gz
   read-only
 image=/boot/vmlinuz-huge-6.9.1
   label=Hug6.9.1
-  initrd=/boot/initrd-6.9.1.gz
   read-only
 </code>

wigums wiki

User Tools

Site Tools

Differences

Page Tools