The CPU frequency scaling feature present in modern computers allows lowering and increasing the processor speed dynamically in runtime so as to save energy while having the possibility of increasing the performance and power consumption if needed. Activating CPU frequency scaling under Slackware is very easy, and requires loading a minimum of two kernel modules and running a simple command. On the one hand, you need to load a specific CPU driver that will activate the frequency scaling feature in your platform. Second, you need to choose a CPU frequency scaling governor, a module that will decide how and when to change the internal processor speed. There are governors to always run at full speed, governors to always run at low speed, governors to increase and decrease the speed based on the CPU load, etc.
Find available governors
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
Setting a governor
nano /etc/default/cpufreq
Applying the governor
make rc.cpufreq executable
chmod +x /etc/rc.d/rc.cpufreq
make sure its running
/etc/rc.d/rc.cpufreq restart
Governor types
Performance
The CPUfreq governor “performance” sets the CPU statically to the highest frequency within the borders of scaling_min_freq and scaling_max_freq.
Powersave
The CPUfreq governor “powersave” sets the CPU statically to the lowest frequency within the borders of scaling_min_freq and scaling_max_freq.
Userspace
The CPUfreq governor “userspace” allows the user, or any userspace program running with UID “root”, to set the CPU to a specific frequency by making a sysfs file “scaling_setspeed” available in the CPU-device directory.
Ondemand
The CPUfreq governor “ondemand” sets the CPU frequency depending on the current system load. Load estimation is triggered by the scheduler through the update_util_data→func hook; when triggered, cpufreq checks the CPU-usage statistics over the last period and the governor sets the CPU accordingly. The CPU must have the capability to switch the frequency very quickly.
Conservative
The CPUfreq governor “conservative”, much like the “ondemand” governor, sets the CPU frequency depending on the current usage. It differs in behaviour in that it gracefully increases and decreases the CPU speed rather than jumping to max speed the moment there is any load on the CPU. This behaviour is more suitable in a battery powered environment.